• Perforated stainless steel screen & Robust design,
• Low flow resistance and Offers 35% open Area.
• Streamlined flow contours minimize pressure drop.
• Compact design with short face to face.
• Asbestos-free non-stick gasket.
• These strainers must not be used in an end of line application without a blanking flange being fitted on the downstream end of the valve.
• Bodies are with Epoxy coating, providing excellent corrosion and wear resistance to the valve's surface. Epoxy coating offers Chemical Resistance Weather ability -Abrasion Resistance Impact Resistance.

• Double regulating feature allow the valve to be used for isolation to be re-opened to its pre-set position to maintain required flow rate.
• Built-in measuring nipple (test point 3mm) for flow measurement based on Kv metholdology.
• Has sufficient authority to regulate flow in circuit incorporating the flow measuring device.

• Double regulating feature allow the valve to be used for isolation to be re-opened to its pre-set position to maintain required flow rate.
• Built-in measuring nipple (test point 3mm) for flow measurement based on Kv metholdology.
• Has sufficient authority to regulate flow in circuit incorporating the flow measuring device.

• Low wieght and short laying length saves Initial cost, requires less space, and is easier to install..
• 200 Micron Fusion Bonded Epoxy Powder Coated Internal and external ensured barrier to corrosive chemicals, moisture and humid air.
• EPDM rubber diaphragm to faciliate quiet/Silent operations.
• Stable Performance, Safe & Reliable.
• Simple Operation, Convenient Adjusting.
• Precise Pressure Reducing.
• Long Service Life.

• Low wleght and short laying length saves initial cost, requires less space, and is easier to install.
• 200 Micron Fusion Bonded Epoxy Powder Coated internal and external ensured barrier to corrosive chemicals, moisture and humid air.
• NBR rubber diaphragm to faciliate quiet/Silent operations.
• Stable Performance, Safe & Reliable.
• Simple Operation, Convenient Adjusting.
• Precise Pressure Reducing.
• Long Service Life.
• Fluctuating upstream pressure to constant pressure thus smooth water flow.
• Main valve and bypass valve for low and high flows.
• Separate adjustment of low Flow-by-Pass and reducing set points

CHROME PLATED ANGLE VALVE (PLBAV10)

• Bill top with hose union.
• Screw Down T Handle.
• Hose tail outlet.
• Bronze/ DUR brass body.
• Fits directly into a wall socket.
• Locksheld type with spare key protect from unauthorisd operation.
• Bib top with house union manufactured from DZR brass/bronze are suitable for use as an external supply, drain off tap, or standpipe.
• Available in Screw down T handle type. Designed to fix directly into a wall fitting, via the 1/2 or 3/4 or 1" mole inlet, and terminales in a hose tail attached to the top body.